Mayco Stoneware Dry: Purple Aster 10lb
- Sku - 2SD199-10
- In Stock
Cone 6: Purple Aster is a glossy, semi-opaque lavender glaze that breaks over texture and develops a pale violet frost; deep blue crystals melt into cascading blossoms of indigo.…
| Each (Exc. VAT) | Price (Exc. VAT) | Quantity | |
|---|---|---|---|
| 1.00 | £86.33 | £86.33 | |
| Each (Inc. VAT) | Price (Inc. VAT) | Quantity | |
| 1.00 | £103.60 | £103.60 |
Please type the quantity you require below or add pre-defined quantities using the controls above.
-
Description
Mayco Stoneware Dry: Purple Aster 10lb
Cone 6: Purple Aster is a glossy, semi-opaque lavender glaze that breaks over texture and develops a pale violet frost; deep blue crystals melt into cascading blossoms of indigo.
Cone 10: Color darkens slightly. No change to crystals.
TIP: Purple Aster uses SW165 Lavender Mist as the base glaze. The base glaze is stable at 3 coats, even with heavy application. Crystals can create movement. Avoid having a heavy concentration of crystals near the bottom of your piece. Can be used in oxidation or reduction firings. Results may vary. The choice of clay body, thickness of application, firing process, and temperature will greatly affect the fired results. Always test your application on your clay body in your kiln environment.
POURING WITH STONEWARE CRYSTAL DRY GLAZES
For fast glazing and flowing effects, we recommend using Mayco’s Stoneware Crystals Dry mix glazes (SDs). Due to the crystals settling to the bottom, we recommend mixing thoroughly and pouring the mixed glazes onto your piece with a pour container or pitcher. Over application in the same area may cause crystals to fall off.
General Use
Use Mayco Stoneware Glazes on any midrange clay body. These glazes are intended for use at cone range 4-6 but are also stable and pleasing at cone 10. Can be used in oxidation, reduction or other alternative atmospheric firing conditions. Always test prior to use.
Mayco's Stoneware Dry Mix glazes contain the same ingredients as our premixed formulas (leaving out viscosity thickeners and preservatives) and are ideally suited for spraying and dipping application. For best results: Gently tumble unopened bag to remix materials. Mix 1 pound of dry material to 1 pint (16 oz.) of water. Thin or thicken as needed. Our dry blends feature uniform and very fine particle sizing; sieving should not ne necessary. For best glazing results: Dipping - stir well right before dipping piece. Immerse the piece for 2-3 seconds; let dry for 3-5 minutes before applying additional coats (optional).Please read and observe the safety precautions on the back panel. For additional safety and usage information please visit www.maycocolours.com.
Certified Non Toxic
Click here for the Mayco Powdered Stoneware Glaze Guide
Click here for a pdf guide to mixing Mayco stoneware glazes
See our Technical Information Sheet "Safe Handling of Powdered Ceramic Materials"
-
Delivery & Returns
Delivery & Returns
Full Delivery & Returns information at this link>
DELIVERIES
Current Delivery Times: Please check the latest update at this link>
Delivery Costs: Your carriage charge will be calculated at checkout based upon the volumetric weight of your order, and your location. If for any reason your delivery charge cannot be calculated at checkout, you will see a message explaining that our sales team will contact you with a quote. You will be under no obligation to accept this and have the right to cancel your order.
We deliver throughout the UK and overseas using a trusted third-party distribution network. Delivery is to kerbside or letterbox only.
Although carriers will endeavour to deliver within the agreed timeframe, unexpected delays due to weather conditions, breakdowns, traffic and other factors may cause some disruption to schedules.
IMPORTANT INFORMATION
We are bound by the terms and conditions of our carriers therefore we cannot pursue a claim if these instructions are not followed:-
Special Delivery Conditions: You must inform us at point of order of any special conditions such as restricted access or opening times, otherwise you will be liable for any consequential costs incurred.
Damage/Missing Items: You must check your delivery carefully before providing a ‘clear’ signature to the driver. Outward signs of damage/disruption to packaging must be noted alongside your signature. You must notify Potclays of damage or missing items within 24 hours of delivery.
RETURNS
Returned Goods (Non-faulty): Subject to our prior consent having been obtained, products can be returned to us in an unused condition within 30 days of invoice date. An administrative charge will be levied of 10% of the nett value plus transport, but subject to a minimum charge of £2.00.
Returned Goods (Faulty): If merchandise is returned because of some defect or due to error on our part, full credit/refund will be given. However, customers must contact us in advance so that making methods and user error can be ruled out.
