Vulcan Black Stoneware (Coarse) 1200-1260C

Vulcan Black Stoneware (Coarse) 1200-1260C

Vulcan™ Black Stoneware (Coarse) 164-VUC  |  Recommended firing 1200-1260C / Cone 5-7

See notes below regarding Vulcan recipe adjustment 2022/23

Vulcan Black Stoneware is unlike any other on the market, providing an unusual intense brown-black colour when fired in an oxidising atmosphere. In a reducing atmosphere a metallic finish with shades of blue are obtained. Containing a coarse grog (up to 12 mesh) Vulcan Black Stoneware Coarse has been formulated especially for artistic ceramics. It behaves excellently during drying/firing and its high plasticity makes it ideal for modelling. It is widely used for murals and sculpture and is ideal for larger scale handbuilding. Supplied in a 12.5kg bag.

Typical Data:

• Firing range: 1200-1260ºC / Cone 5-7
• Biscuit temperature: 1000ºC
• Texture 8-9 on our indicative texture scale, smooth1, coarse 10.
• Water content: 21%
• Plasticity (IP Atterberg): 22
• Carbonate content (CaCO3): 0%
• Drying shrinkage: 7.0%
• Firing shrinkage (1260ºC): 3.6%
• Porosity (water absorption at 1260ºC): 9.8%
• Dry bending strength: 2.0 N/mm2
• Fired bending strength (1260ºC): 22.0 N/mm2
• Thermal coefficient (25-500ºC): 50.3x10^-7ºC^-1

TECHNICAL NOTES

Recipe Adjustment for Vulcan Bodies 2022/23:

From batch number 2322 (Production Week 23, 2022), due to unavailability of a raw material SIO-2 were forced to make an adjustment to the Vulcan recipe. Due to the high amount of grog, 164-VUC and VUX were not affected by the glaze thermal expansion sensitivity issues that affected older batches of 164-VUF and VUM. 

• Vulcan Black Stoneware (Coarse) is not recommended for tableware due to the grog content. Please see Vulcan Black Stoneware (Fine) instead.
• Vulcan is not toxic according to European Rules (CLP) and also American Rules (ASTM D 4236). The manganese dioxide content in Vulcan bodies is lower than 5%: Under the CLP regulation, the manganese dioxide content required for classification as toxic must be greater than 25%. 
• Vulcan Black Stoneware is no longer recommended for use in casting slips due to the high plasticity which makes it difficult to correctly deflocculate.

When glazing:

• Use zinc-free (Zn-free) glazes to prevent unexpected reactions such as bubbling or colour changes. Other elements that can react are zirconium (Zr) and tin (Sn). We have found that Mayco zinc-free clear glaze is suitable for use with Vulcan bodies and does not seem to suffer from the usual problems caused by outgassing from the high oxide levels in black bodies. Many ^6 commercial glazes such as Mayco perform well on Vulcan but trial-and-error is needed. Also see our potclaysglazes Instagram feed/highlights.

To comply with RHA regulations concerning tail-lift deliveries (where there is no fork-lift truck available at the delivery point) the maximum net weight of clay we are now permitted to pack on standard pallet is 950kg (76 x 12.5kg bags of clay). To achieve the best price for your clay, please add the full 1000kg to your cart when checking out and we will make the necessary weight adjustment/refund when we receive the order.