HEX Bat System
- Sku - 7015-HEX
- In Stock
Copyright Katie Robbins
Improved Design 2023: Improved insert fit, and now with a laser engraved logo
The HEX© Bat System has been designed and developed by Potclays Ltd. and is made in the UK.
It is supplied exclusively by Potclays Ltd. and our authorised distributors.
It is designed to fit wheelheads fitted with bat pins, but can also be used …
| Each (Exc. VAT) | Price (Exc. VAT) | Quantity | |
|---|---|---|---|
| 1.00 | £45.83 | £45.83 | |
| Each (Inc. VAT) | Price (Inc. VAT) | Quantity | |
| 1.00 | £55.00 | £55.00 |
Please type the quantity you require below or add pre-defined quantities using the controls above.
-
Description
HEX Bat System
Improved Design 2023: Improved insert fit, and now with a laser engraved logo
The HEX© Bat System has been designed and developed by Potclays Ltd. and is made in the UK.
It is supplied exclusively by Potclays Ltd. and our authorised distributors.
It is designed to fit wheelheads fitted with bat pins, but can also be used on un-drilled wheelheads - please see advice below.
The HEX© Bat System is 350mm overall diameter, supplied with five 190mm (measured flat-to-flat) hexagonal inserts made from top quality exterior 12mm MDF. The MDF is left untreated for a slightly porous finish which will aid release of the pot from the bat as it dries. The hexagonal shape of the inserts provides a space-saving solution for storing your pots.
Will the HEX© Bat System fit my wheel?
The HEX Bat System has been fit-tested with factory-pinned Shimpo and Brent wheelheads. The outer ring is drilled for standard 9.38-10mm dia. pins on US-standard 254mm (10") centres. The HEX bat system is not suitable for the Shimpo Tabletop RK5T. Please check with us before ordering if you are in any doubt.
Please note that a slightly loose fit, both over the pins and within the aperture, is normal as there are always tolerances with wood products and this should not impact on the product when in use.
Can I use the HEX© Bat System on my undrilled wheelhead?
Yes - we have tested our HEX© Bat System on an un-drilled wheelhead by using a dampened Xiem BatMate to grip the HEX© Bat System. Soak the BatMate in water, and wring out then place onto the clean wheelhead. Wipe a damp sponge over the underside of the bat system then press down firmly onto the BatMate for a good grip. This method is only suitable for throwing small to medium sized pieces as more upwards pressure when throwing larger pieces may result in the bat detaching from the BatMate.
How do I look after my HEX© Bat System?
- Wipe with a damp sponge to clean. Do not get the inserts excessively wet as they may swell.
- If the inserts do swell, allow to dry completely. You may need to lightly sand the edges to get them to fit again.
- Dry and store the inserts on their side in a washing-up drainer rack or similar so the air can circulate. Avoid stacking inserts unless completely dry.
Can I buy extra inserts for my HEX© Bat System?
-
Delivery & Returns
Delivery & Returns
Full Delivery & Returns information at this link>
DELIVERIES
Current Delivery Times: Please check the latest update at this link>
Delivery Costs: Your carriage charge will be calculated at checkout based upon the volumetric weight of your order, and your location. If for any reason your delivery charge cannot be calculated at checkout, you will see a message explaining that our sales team will contact you with a quote. You will be under no obligation to accept this and have the right to cancel your order.
We deliver throughout the UK and overseas using a trusted third-party distribution network. Delivery is to kerbside or letterbox only.
Although carriers will endeavour to deliver within the agreed timeframe, unexpected delays due to weather conditions, breakdowns, traffic and other factors may cause some disruption to schedules.
IMPORTANT INFORMATION
We are bound by the terms and conditions of our carriers therefore we cannot pursue a claim if these instructions are not followed:-
Special Delivery Conditions: You must inform us at point of order of any special conditions such as restricted access or opening times, otherwise you will be liable for any consequential costs incurred.
Damage/Missing Items: You must check your delivery carefully before providing a ‘clear’ signature to the driver. Outward signs of damage/disruption to packaging must be noted alongside your signature. You must notify Potclays of damage or missing items within 24 hours of delivery.
RETURNS
Returned Goods (Non-faulty): Subject to our prior consent having been obtained, products can be returned to us in an unused condition within 30 days of invoice date. An administrative charge will be levied of 10% of the nett value plus transport, but subject to a minimum charge of £2.00.
Returned Goods (Faulty): If merchandise is returned because of some defect or due to error on our part, full credit/refund will be given. However, customers must contact us in advance so that making methods and user error can be ruled out.
